Institute of New Materials and Technologies

  • Мира, 28

    620002 Екатеринбург

    Russian Federation

Research Output 1973 2019

Filter
Conference contribution
2018

The investigation of the influence of friction and roll calibration on the pipe formation during plug rolling

Pavlov, D., Bogatov, A. & Pavlova, E., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 552-556 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

plugs
friction
Pipe
Calibration
Friction

Theoretical investigation of the effect of the taper angle of the deforming roller on the limiting degrees of deformation in the process of flow forming

Udalov, A. A., Parshin, S. V. & Udalov, A. V., 30 Oct 2018, In : MATEC Web of Conferences. 224, 01040.

Research output: Contribution to journalConference articleResearchpeer-review

rollers
tapering
engineering
steady flow
Steady flow

The possibility of obtaining electrical steel with texture {100} <001>

Redikultsev, A. A., Rusakov, G. M. & Lobanov, M. L., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 483-488 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Shear bands
Steel
textures
Textures
steels

Thermomechanical hardening of steels

Shveikin, V. P., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 507-512 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Steel
hardening
thermomechanical treatment
Hardening
Thermomechanical treatment

The use of intermediate inserts for CO2 laser welding of steel AISI 321 and a Grade 2 titanium alloy

Pugacheva, N. B., Senaeva, E. I., Makarov, A. V., Trushina, E. B. & Vichuzhanin, D. I., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 030055

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

welded joints
laser welding
titanium alloys
inserts
grade

The use of metastable austenite to increase the wear resistance of steels of the pearlite class

Filippov, M., Yagudin, G., Legchilo, V., Khadiyev, M., Ozerets, N. & Estemirova, S., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 1163-1167 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

pearlite
Pearlite
Steel
austenite
wear resistance

Time series forecasting of methane concentrations in the surface layer of atmospheric air in Arctic region

Sergeev, A., Shichkin, A. & Buevich, A., 10 Dec 2018, Proceedings of the 44th International Conference on Applications of Mathematics in Engineering and Economics, AMEE 2018. Venkov, G., Popivanov, N. & Pasheva, V. (eds.). American Institute of Physics Inc., Vol. 2048. 060005

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Arctic regions
forecasting
surface layers
methane
air

To the problem of reducing the amount of harmful emissions when refining silver

Polygalov, S. E., Mastugin, S. A. & Shadrina, E. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 877-881 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Silver refining
refining
Silver
dissolving
Dissolution

Training algorithms for artificial neural network in predicting of the content of chemical elements in the upper soil layer

Shichkin, A., Buevich, A., Sergeev, A., Baglaeva, E., Subbotina, I., Vasilev, J. & Kehayova-Stoycheva, M., 10 Dec 2018, Proceedings of the 44th International Conference on Applications of Mathematics in Engineering and Economics, AMEE 2018. Venkov, G., Popivanov, N. & Pasheva, V. (eds.). American Institute of Physics Inc., Vol. 2048. 060004

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

chemical elements
soils
education
self organizing systems
descent
1 Citation (Scopus)

Water-Resistant Gypsum Binding Agents and Concretes Based Thereof as Promising Materials for Building Green

Domanskaya, I., Bednyagin, S. & Fisher, H. B., 10 Aug 2018, In : IOP Conference Series: Earth and Environmental Science. 177, 1, 012029.

Research output: Contribution to journalConference articleResearchpeer-review

gypsum
slag
lime
calcium
water

Zero “background” line for iron alloys samples dilatographs decoding

Mikhailov, S. B., Mikhailova, N. A. & Sharapova, V. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 536-541 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

iron alloys
Iron alloys
decoding
Decoding
Atoms
2017
1 Citation (Scopus)

Abnormal behavior of lattice spacing of titanium orthorhombic martensite

Demakov, S., Semkina, I. & Stepanov, S., 2017, Advanced Technologies of Materials Processing II - 10th BraMat 2017. Trans Tech Publications Ltd., Vol. 907 MSF. p. 14-20 7 p. (Materials Science Forum; vol. 907 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Diffractometers
Titanium
martensite
Martensite
Thermal expansion

A genetic algorithm used for solving one optimization problem

Shipacheva, E. N., Petunin, A. A. & Berezin, I. M., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040052

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

genetic algorithms
blanks
optimization
traveling salesman problem
numerical control
1 Citation (Scopus)

A hybrid method for assessment of soil pollutants spatial distribution

Tarasov, D. A., Medvedev, A. N., Sergeev, A. P., Shichkin, A. V. & Buevich, A. G., 21 Jul 2017, International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2016. American Institute of Physics Inc., Vol. 1863. 050015

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

kriging
contaminants
soils
spatial distribution
subarctic regions

Alkali Fusion-Leaching Method for Comprehensive Processing of Fly Ash

Shoppert, A., Loginova, I. V., Chaikin, L. I. & Rogozhnikov, D. A., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 89-96 8 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Analytical description of the bainite transformation kinetics in steels 300M and D6AC

Kuklina, A. A., Maisuradze, M. V. & Yudin, Y. V., 2017, Advanced Technologies of Materials Processing II - 10th BraMat 2017. Trans Tech Publications Ltd., Vol. 907 MSF. p. 31-37 7 p. (Materials Science Forum; vol. 907 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

bainite
adequacy
Bainite
Steel
Analytical models
1 Citation (Scopus)

A novel method of aluminum-gadolinium master alloy production

Maksimtsev, K., Krylosov, A., Polovov, I., Zhilyakov, A., Belikov, S., Volkovich, V. & Rebrin, O., 26 Sep 2017, Physics, Technologies and Innovation, PTI 2017: Proceedings of the IV International Young Researchers' Conference. American Institute of Physics Inc., Vol. 1886. 020063

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

gadolinium alloys
aluminum alloys
gadolinium
aluminum fluorides
thermophysical properties

Antifriction coating of Cu-Fe-Al-Pb system for plain bearings

Kotenkov, P., Kontsevoi, Y., Mejlakh, A., Pastukhov, E., Shubin, A., Goyda, E. & Sipatov, I., 26 Sep 2017, Physics, Technologies and Innovation, PTI 2017: Proceedings of the IV International Young Researchers' Conference. American Institute of Physics Inc., Vol. 1886. 020088

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

plains
coatings
aluminum compounds
copper compounds
internal combustion engines

Application of integral equations for analysis of electrodynamic and thermal processes in electric drive

Borodin, M. Y., Borodin, E. M. & Metelkov, V. P., 24 Apr 2017, 2016 2nd International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7911533

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electric drives
Electrodynamics
Integral equations
Integral Equations
Thermodynamics

Application of Ni-Mg-Ce Master Alloy Scrap for Inoculation of Copper-Nickel Alloys

Mysik, R. K., Brusnitsyn, S. V. & Sulitsin, A. V., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 102-108 7 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Application of the complete material balance method to estimate the composition of weld metal in manual arc welding

Votinova, E. B. & Shalimov, M. P., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 762-766 5 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

material balance
arc welding
Electric arc welding
Welds
Metals

Applying the electron concentration calculation method to assess the influence of hydrogen on the position of the variable solubility lines in Ti-Cr system

Popov, A. A., Illarionov, A. G. & Grib, S. V., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 563-568 6 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Hydrogen
solubility
Solubility
Electrons
hydrogen

Autoclave Precipitation of Iron from Zinc Sulfate Solutions

Karimov, K. A., Kritskii, A. V., Naboichenko, S. S., Kolmachikhina, O. B. & Rogozhnikov, D. A., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 76-82 7 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Automated system for preventing accidents with open-pit transport

Liberman, Y. L. & Letnev, K. Y., 24 Apr 2017, 2016 2nd International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2016 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 7910893

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Anti-lock braking systems
Accidents
Poles
Range finders
Pole

Beta-phase decomposition sequence during continuous cooling of high-temperature titanium alloy

Gadeev, D. V., Demakov, S. L. & Vodolazskiy, F. V., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 575-579 5 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

titanium alloys
heat resistant alloys
Superalloys
Titanium alloys
Cooling
1 Citation (Scopus)

Careful control of refractory lining conditions at NTMK-EVRAZ ensures intensive operation and long campaign of titania blast furnace

Kushnarev, A., Mironov, K., Gordon, Y., Sadri, A., Ying, W. & Zagainov, S. A., 2017, AISTech 2017 - Proceedings of the Iron and Steel Technology Conference. Association for Iron and Steel Technology, Vol. 1. p. 699-706 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Chemical Stabilization Features of Ladle Furnace Slag in Ferrous Metallurgy

Sheshukov, O. Y., Mikheenkov, M. A., Egiazaryan, D. K., Ovchinnikova, L. A. & Lobanov, D. A., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 59-64 6 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1 Citation (Scopus)

Complex large-scale convection of a viscous incompressible fluid with heat exchange according to Newton's law

Gorshkov, A. V. & Prosviryakov, E. Y., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040019

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

incompressible fluids
newton
convection
heat
convective flow

Computer-aided analysis of cutting processes for brittle materials

Ogorodnikov, A. I. & Tikhonov, I. N., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030014

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

brittle materials
scoring
wafers
programming languages
optical materials

Computer-aided modeling of a screw firmware of the workpiece and adequacy evaluation of solution results

Toporov, V. A., Nukhov, D. S., Bogatov, A. A., Ponasenko, O. & Pyankov, K., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 931-936 6 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

firmware
Firmware
casing
adequacy
screws
1 Citation (Scopus)

Computer Technologies and Tools for Creation of Information Modelling Systems for Process Tasks Solution in Metallurgy

Spirin, N. A., Gurin, I. A. & Grebneva, N., 2017, 2017 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2017 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 5 p. 8076426

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1 Citation (Scopus)

Convective flow in the solid rotation of a viscous incompressible fluid

Gorshkov, A. V. & Prosviryakov, E. Y., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040020

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

rotating bodies
convective flow
incompressible fluids
pressure distribution
oceans
2 Citations (Scopus)

Corrosion of austenitic steels and their components in uranium-containing chloride melts

Polovov, I. B., Abramov, V., Dedov, K. V., Karpov, V. V., Zhilyakov, A. Y., Gibadullina, A. F., Belikov, S. V., Volkovich, V. A. & Rebrin, O. I., 2017, Selected Proceedings from the 231st ECS Meeting New Orleans, LA - Spring 2017. 11 ed. Electrochemical Society, Inc., Vol. 77. p. 847-855 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Austenitic steel
Austenitic stainless steel
Uranium
Molybdenum
Corrosion resistance
3 Citations (Scopus)

Corrosion of nickel-based superalloys in molten chloroaluminates

Polovov, I. B., Abramov, A. V., Karpov, V. V., Gibadullina, A. F., Zhilyakov, A. Y., Dedov, K. V., Belikov, S. V., Shak, A. V., Volkovich, V. A. & Rebrin, O. I., 2017, Selected Proceedings from the 231st ECS Meeting New Orleans, LA - Spring 2017. 11 ed. Electrochemical Society, Inc., Vol. 77. p. 753-766 14 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Superalloys
Molten materials
Nickel
Specification languages
Corrosion
2 Citations (Scopus)

Corrosion resistance of nickel-based alloys in salt and metal melts containing REE

Abramov, A. V., Karpov, V. V., Zhilyakov, A. Y., Belikov, S. V., Volkovich, V. A., Polovov, I. B. & Rebrin, O. I., 26 Sep 2017, Physics, Technologies and Innovation, PTI 2017: Proceedings of the IV International Young Researchers' Conference. American Institute of Physics Inc., Vol. 1886. 020029

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

corrosion resistance
nickel
Hastelloy (trademark)
salts
nickel alloys

Cu-Ni-Zn 15-20 alloy - Particular qualities of alloying and crystallization parameters

Baraz, V. R., Gerasimov, S. S. & Gruzdeva, I. A., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 767-771 5 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Crystallization
Alloying
alloying
Casting
crystallization

Current state and future prospects for improvement of mineral melt production technologies

Matyukhin, V. I., Dudko, V. A. & Grebneva, N. V., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 14-21 8 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Cupolas
Mineral wool
Minerals
furnaces
minerals
2 Citations (Scopus)

Determining the Young's modulus of a cellular titanium implant by FEM simulation

Loginov, Y. N., Golodnov, A. I., Stepanov, S. I. & Kovalev, E. Y., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030010

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

modulus of elasticity
titanium
honeycomb structures
titanium alloys
recommendations

Development of intellectual fuel supplies planning system

Aksyonov, K. A., Nevolina, A. L., Ayvazyan, H. L. & Aksyonova, O. P., 12 Jul 2017, Proceedings of the 29th Chinese Control and Decision Conference, CCDC 2017. Institute of Electrical and Electronics Engineers Inc., p. 3648-3651 4 p. 7979138

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Planning
Imitation
Transportation Problem
Formalization
Decision Making

EBSD analysis of the structural state of the Cu-Zn-Mn-Al-Fe-Ni alloy after hot deformation

Pugacheva, N. B., Khudorozhkova, Y. V. & Derevyankin, E. V., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030020

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

blanks
grain boundaries
polygonization
embrittlement
heat resistant alloys
3 Citations (Scopus)

Eddy-current testing of fatigue degradation upon contact fatigue loading of gas powder laser clad NiCrBSi-Cr3C2 composite coating

Savrai, R. A., Makarov, A. V., Gorkunov, E. S., Soboleva, N. N., Kogan, L. K., Malygina, I. Y., Osintseva, A. L. & Davydova, N. A., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040049

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

eddy currents
degradation
coatings
composite materials
gases

Effect of heat treatment temperature-rate parameters on structure and complex of physical-mechanical properties in VST5553 titanium alloy rod semi-finished goods

Illarionov, A. G., Zhelnina, A. V. & Kalienko, M. S., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 785-788 4 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

titanium alloys
Titanium alloys
heat treatment
rods
Heat treatment
3 Citations (Scopus)

Effect of pore architecture of titanium implants on stress-strain state upon compression

Loginov, Y. N., Stepanov, S. I. & Khanykova, E. V., 2017, Materials Engineering and Technologies for Production and Processing III - ICIE-2017. Trans Tech Publications Ltd., Vol. 265 SSP. p. 606-610 5 p. (Solid State Phenomena; vol. 265 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Titanium
titanium
porosity
cells
ABAQUS
2 Citations (Scopus)

Effect of preliminary nanostructuring frictional treatment on the efficiency of nitriding of metastable austenitic steel in electron beam plasma

Makarov, A. V., Gavrilov, N. V., Mamaev, A. S., Osintseva, A. L., Kurennykh, T. E., Savrai, R. A. & Samoylova, G. V., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 030011

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

nitriding
steels
electron beams
hardening
nitrogen

Electronic structure and luminescence properties of Ca2Ge7O16:Dy3+: Dy3+

Leonidov, I. I., Ishchenko, A. V., Konstantinova, E. I., Petrov, V. P., Chernyshev, V. A. & Nikiforov, A. E., 2017, XXV-TH CONGRESS ON SPECTROSCOPY. Vinogradov, EA., Naumov, AV., Gladush, MG. & Karimullin, KR. (eds.). EDP Sciences, Vol. 132. 2 p. (EPJ Web of Conferences; vol. 132).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Energy Efficient Technology of Solid Domestic Waste Recycling in Shaft Furnaces of Cupola Type

Matyukhin, V. I., Yaroshenko, Y. G., Matyukhin, O. V. & Zhuravlev, S. Y., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 8-13 6 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Environmental and Technological Aspects of Converter Slag Utilization in Sintering and Blast-Furnace Production

Spirin, N. A., Polinov, A. A., Pavlov, A. V., Onorin, O. P. & Logachev, G. N., 2017, INTERNATIONAL CONFERENCE WITH ELEMENTS OF SCHOOL FOR YOUNG SCIENTISTS ON RECYCLING AND UTILIZATION OF TECHNOGENIC FORMATIONS (TECHNOGEN-2017). Yurievich, SO. (ed.). Knowledge E, p. 19-27 9 p. (KnE Materials Science).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1 Citation (Scopus)

Estimation of metallic structure durability for a known law of stress variation

Mironov, V. I., Lukashuk, O. A. & Ogorelkov, D. A., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040039

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

durability
degradation
cranes
endurance
free vibration
1 Citation (Scopus)

Evolution of microstructure in stainless martensitic steel for seamless tubing

Pyshmintsev, I. Y., Bityukov, S. M., Pastukhov, V. I., Danilov, S. V., Vedernikova, L. O. & Lobanov, M. L., 12 Dec 2017, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2017: Proceedings of the 11th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. American Institute of Physics Inc., Vol. 1915. 040048

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

martensitic stainless steels
textures
microstructure
quenching
tempering