Institute of New Materials and Technologies

  • Мира, 28

    620002 Екатеринбург

    Russian Federation

Research Output 1973 2019

Filter
Conference contribution
2018

Efficiency increase in excavation control as primary reserve of performance increase for open-pit excavators

Lukashuk, O., Letnev, K. & Komissarov, A., 30 Oct 2018, In : MATEC Web of Conferences. 224, 02028.

Research output: Contribution to journalConference articleResearchpeer-review

Excavators
excavation
Excavation
buckets
transfer functions

Efficient assessment of physico-chemical properties of the cryolite melts for research on the improvement of low-temperature aluminum electrolysis

Lebedev, V. A. & Shoppert, A. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 839-844 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

cryolite
electrolysis
Aluminum
Electrolysis
chemical properties

Engineering method for analysis of the ability to strain-hardening of steels

Filippov, M. A., Korzunova, E. I. & Tyumkova, M. V., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 1168-1172 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

strain hardening
Steel
Manganese
Strain hardening
steels
3 Citations (Scopus)

Estimating the trajectory of a thrown object from video signal with use of genetic programming

Gayanov, R., Mironov, K. & Kurennov, D., 18 Jun 2018, 2017 IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2017. Institute of Electrical and Electronics Engineers Inc., p. 134-138 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Genetic programming
Trajectories
Robotics
Learning systems
Cameras

Evaluation of the processing opportunity of galvanic production sludges with nickel recovery

Boshnyak, M. V., Galimianov, A. R. & Kolmachikhina, O. B., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 790-794 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

sludge
Nickel
recovery
nickel
Recovery

Examination of hardening curves definition methods in torsion test

Erpalov, M. V. & Kungurov, E. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 598-604 7 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

hardening
Torsional stress
torsion
Hardening
examination

Experimental study of moveable contact joint characteristics in power-distribution equipment

Goman, V. & Fedoreev, S., 1 May 2018, Proceedings - 2018 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2018. Institute of Electrical and Electronics Engineers Inc., 8728814. (Proceedings - 2018 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Power Distribution
Experimental Study
Contact
Coating
Protective coatings

Features of designing hydraulic excavator in APM WinMachine

Shestakov, V., Babenkov, P. & Horoshavin, S., 30 Oct 2018, In : MATEC Web of Conferences. 224, 02046.

Research output: Contribution to journalConference articleResearchpeer-review

Excavators
hydraulics
Hydraulics
boom
buckets

Features of shear transformation texture in seamless pipes

Lobanov, M. L., Pyshmintsev, Y. I., Maltseva, A. N., Uskov, D. P., Danilov, S. V., Makarova, E. A. & Pastukhov, V. I., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 040051

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

textures
shear
austenite
phase transformations
steels

Fem simulation of copper busbar pressing on the continuous extrusion line"conform"

Shimov, G., Bogatov, A. & Kovin, D., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 547-551 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Busbars
pressing
Extrusion
Copper
Metals

Forecasting of chromium distribution in subarctic noyabrsk using generalized regression neural networks and multilayer perceptron

Tarasov, D., Buevich, A., Shichkin, A. & Vasilev, J., 10 Jul 2018, International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2017. American Institute of Physics Inc., Vol. 1978. 440024

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

self organizing systems
forecasting
regression analysis
chromium
kriging

Forecasting of heavy metal distribution based on co-kriging and generalized regression neural network with co-elements concentration as input data

Buevich, A., Shichkin, A., Tyagunov, A., Baglaeva, E. & Atanasova, T., 10 Jul 2018, International Conference of Numerical Analysis and Applied Mathematics, ICNAAM 2017. American Institute of Physics Inc., Vol. 1978. 440018

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

kriging
heavy metals
forecasting
regression analysis
chemical elements

Forecasting of spatial variable by the models based on artificial neural networks on an example of heavy metal content in topsoil

Shichkin, A., Buevich, A., Sergeev, A., Baglaeva, E. & Subbotina, I., 30 Nov 2018, International Conference of Computational Methods in Sciences and Engineering 2018, ICCMSE 2018. Simos, T. E., Kalogiratou, Z., Monovasilis, T., Simos, T. E. & Simos, T. E. (eds.). American Institute of Physics Inc., Vol. 2040. 050007

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

heavy metals
forecasting
kriging
spatial distribution
chemical elements

Formation of stable and metastable aluminides in Al-Zr-Ti, Al-Ti-Nb alloys

Kotenkov, P., Popova, E. & Gilev, I., 25 Sep 2018, Physics, Technologies and Innovation, PTI 2018: Proceedings of the V International Young Researchers' Conference. American Institute of Physics Inc., Vol. 2015. 020046

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

aluminides
liquidus
crystallization
microscopy
scanning electron microscopy

Gold electroextraction fundamentals using zinc three-dimensional cathode

Naumov, K. D. & Lobanov, V. G., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 850-855 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Cyanides
cyanides
Gold
Zinc
Cathodes

Heat treatment forming a dissipative metal base in wear-resistant chromium-alloyed cast iron

Filippov, M. A., Nikiforova, S. M., Shveykin, V. P. & Sharapova, V. A., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 030016

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

abrasives
austenite
martensite
carbides
casts

Hot-rolled texture of fcc and bcc metals

Danilov, S. V. & Reznik, P. L., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 605-609 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

textures
Textures
Metals
surface layers
metals

Hydrolytic resistance of na2o-sio2-sno2 glass system

Kovyazina, I., Vlasova, S. & Kapustin, F., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 54-58 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Glass
glass
sodium silicates
dilatometry
Chemical stability

Il'insky diatomite in building ceramics production

Glyzina, A. E., Pavlova, I. A. & Farafontova, E. P., 14 Dec 2018, In : IOP Conference Series: Materials Science and Engineering. 451, 1, 012030.

Research output: Contribution to journalConference articleResearchpeer-review

Brick
Molding
Minerals
Thermal conductivity
Moisture
1 Citation (Scopus)

Improvement of manufacturing technology for thin-walled pipes made of copper alloys

Aleksandrovich, B. A., Rinatovich, S. D. & Sergeevich, O. A., 1 Jan 2018, Resource Efficient Material and Forming Technologies - MEFORM 2018. Trans Tech Publications Ltd., p. 140-144 5 p. (Materials Science Forum; vol. 918 MSF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

copper alloys
Copper alloys
manufacturing
Pipe
grade

Improvements in energy efficiency of blast furnace operation at NLMK, Russia

Filatov, S. V., Zagainov, S. A., Listopadov, V. S. & Gordon, Y. M., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, Vol. 2018-May. p. 347-351 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Blast furnaces
Energy efficiency
Melting
Productivity
Slags

Improving the impact toughness of the Hy-Tuf steel by austempering

Maisuradze, M. V. & Ryzhkov, M. A., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 040054

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

tempering
toughness
steels
tensile strength
oils

Improving the scratch test properties of plasma-nitrided stainless austenitic steel by preliminary nanostructuring frictional treatment

Lezhnin, N. V., Makarov, A. V., Gavrilov, N. V., Osintseva, A. L. & Savrai, R. A., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 040050

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

austenitic stainless steels
nitriding
microhardness
surface properties
chromium

Increasing the abrasive wear resistance of high-chromium steel after cold treatment

Filippov, M., Ozerets, N., Nikiforova, S. & Smagireva, E., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 1157-1162 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

chromium steels
Steel
abrasives
Chromium
wear resistance

Increasing the micromechanical and tribological characteristics of an austenitic steel by surface deformation processing

Skorynina, P. A., Makarov, A. V., Volkova, E. G. & Osintseva, A. L., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 030064

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

steels
surface layers
elastic deformation
wear resistance
microhardness
1 Citation (Scopus)

Increasing the resistance of a NiCrBSi coating to heat wear by means of combined laser heat treatment

Makarov, A. V., Soboleva, N. N., Gibzun, M. S., Malygina, Y. I. & Korobov, Y. S., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 030037

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

heat treatment
coatings
heat
chromium borides
lasers

Increasing the working efficiency of the forholler of the pilger rolling mill

Chechulin, Y. B. & Popov, Y. A., 2 Nov 2018, In : IOP Conference Series: Materials Science and Engineering. 441, 1, 012012.

Research output: Contribution to journalConference articleResearchpeer-review

Rolling mills
Brakes
Pistons

Influence of Alloying on the Thermal Stability of Model Heat Resistant Compositions

Tyagunov, A., Baryshev, E., Tyagunov, G. & Shmakova, K., 12 Jun 2018, In : IOP Conference Series: Materials Science and Engineering. 374, 1, 012006.

Research output: Contribution to journalConference articleResearchpeer-review

Alloying
Thermodynamic stability
Tantalum
Nickel alloys
Chemical analysis

Influence of structural damping on the durability of a crane metal construction

Mironov, V. I., Ogorelkov, D. A. & Yakovlev, V. V., 19 Dec 2018, Mechanics, Resource and Diagnostics of Materials and Structures, MRDMS 2018: Proceedings of the 12th International Conference on Mechanics, Resource and Diagnostics of Materials and Structures. Ramasubbu, S., Gorkunov, E. S. & Panin, V. E. (eds.). American Institute of Physics Inc., Vol. 2053. 040060

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

cranes
durability
damping
service life
personal computers

Influence of zinc sulfide wetting in surfactants presence on leaching parameters

Kolmachikhina, E. B., Ryzhkova, E. A. & Dmitrieva, D. V., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 737-742 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Zinc sulfide
zinc sulfides
leaching
Surface-Active Agents
Leaching
Smelting
Blast furnaces
Decision support systems
Gases
Gas dynamics

Integration of lining and cooling system diagnostics methods into the expert system to reduce hot metal production cost and increase blast furnace productivity

Gordon, Y., Sadri, A., Izumskiy, N., Matveienko, G., Chaika, O., Safonov, S. & Fomenko, O., 1 Jan 2018, AISTech 2018 Proceedings - Iron and Steel Technology Conference and Exposition. Association for Iron and Steel Technology, Vol. 2018-May. p. 515-522 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

1 Citation (Scopus)

Investigation of complex treatment of the gold-bearing antimony flotation concentrate

Rusalev, R. E., Rogozhnikov, D. A. & Naboichenko, S. S., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 863-869 7 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Bearings (structural)
Antimony
flotation
Flotation
antimony

Investigation of Intermetallic Alloys Based on Ni-Mn with Controlled Shape Memory Effect

Belosludtseva, E. S., Pushin, V. G., Marchenkova, E. B., Svirid, A. E. & Pushin, A. V., 2018, SHAPE MEMORY ALLOYS, SMA 2018. Buchelnikov, Sokolovskiy, Zagrebin, M. & Miroshkina, O. (eds.). Materials Research Forum LLC, p. 14-18 5 p. (Materials Research Proceedings; vol. 9).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Investigation of structure and heat treatment of various grades of corrosion-resistant alloy VDM® alloy C-4

Gibadullina, A. F., Shak, A. V., Zhilyakov, A. Y., Belikov, S. V., Polovov, I. B. & Rebrin, O. I., 25 Sep 2018, Physics, Technologies and Innovation, PTI 2018: Proceedings of the V International Young Researchers' Conference. American Institute of Physics Inc., Vol. 2015. 020024

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

grade
corrosion
heat treatment
cooling
solid solutions

Ion-plasma sprayed coating as a protective decorative coating for copper-nickel alloy

Baraz, V. R., Gerasimov, S. S. & Gruzdeva, I. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 1195-1199 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

sprayed coatings
protective coatings
copper alloys
Sprayed coatings
nickel alloys

Kinematic features of operational equipment linkage in single-bucket excavators

Komissarov, A. P., Lukashuk, O. A. & Letnev, K. Y., 7 Feb 2018, ICMRE 2018 - Proceedings of 2018 4th International Conference on Mechatronics and Robotics Engineering. Association for Computing Machinery (ACM), p. 121-125 5 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Excavators
Kinematics
Transfer functions
Electrocardiography
Experiments

Laser-spark modification of the surfaces of structural materials by the example of st3

Kuptsov, S., Shimov, V. & Magomedova, R., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 1268-1272 5 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

sparks
Electric sparks
abrasives
wear resistance
coatings

Laser welded joints of high-nitrogen austenitic steels: Microstructure and properties

Berezovskaya, V. V., Berezovskiy, A. V. & Hilfi, D. H., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 344-350 7 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

welded joints
Austenitic steel
Welds
Nitrogen
steels

Location management of mobile nodes in low-power wireless sensor network using link quality metric

Ermakov, A., Gorshkov, N. & Titaev, A., 1 Jan 2018, In : CEUR Workshop Proceedings. 2298

Research output: Contribution to journalConference articleResearchpeer-review

Transceivers
Wireless sensor networks
Interpolation

Magnetic and mechanical properties of the amorphous alloys

Tsepelev, V., Starodubtsev, Y., Kai-Ming, W., Tsepeleva, N. & Taushkanova, A., 1 Jan 2018, Engineering and Innovative Materials VI 6th ICEIM 2017. Trans Tech Publications Ltd., Vol. 382 DDF. p. 58-62 5 p. (Defect and Diffusion Forum; vol. 382 DDF).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Electromagnetic induction
magnetic induction
Amorphous alloys
Magnetic properties
mechanical properties

Management of the Internal Transaction Sector of Large Integrated Structures

Gorodnova, N. V., Krupkin, A. V., Voronov, D. S., Peshkova, A. A. & Rozhentsov, I. S., 2018, INNOVATION MANAGEMENT AND EDUCATION EXCELLENCE THROUGH VISION 2020, VOLS I -XI. Soliman, KS. (ed.). International Business Information Management Association, IBIMA, p. 1013-1027 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Mathematical modelling of ladle furnace thermal regime with bubble melt blowing by gas

Spirin, N. A., Shvidkii, V. S., Yaroshenko, Y. G. & Lavrov, V. V., 19 Oct 2018, In : IOP Conference Series: Materials Science and Engineering. 411, 1, 012074.

Research output: Contribution to journalConference articleResearchpeer-review

Steel
Blow molding
Furnaces
Gases
Heating

Mathematical model of polystyrene concrete structure for design of its strength characteristics

Rudnov, V. S., Belyakov, V. A. & Gerasimova, E. S., 14 Dec 2018, In : IOP Conference Series: Materials Science and Engineering. 451, 1, 012015.

Research output: Contribution to journalConference articleResearchpeer-review

Polystyrenes
Concrete construction
Raw materials
Mathematical models
Concrete mixtures

Microsilica as component of organic-mineral modifier for fine-aggregate concrete

Gerasimova, E. S. & Berdysheva, P. A., 14 Dec 2018, In : IOP Conference Series: Materials Science and Engineering. 451, 1, 012029.

Research output: Contribution to journalConference articleResearchpeer-review

Organic minerals
Concrete aggregates
Silica fume
Minerals
Polymers

Microstructure and mechanical properties of high strength alloyed steel for aerospace application

Maisuradze, M. V. & Ryzhkov, M. A., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 351-356 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Aerospace applications
high strength steels
High strength steel
Quenching
quenching

Mineral wool sawdust additive effect on oil-well mortar and stone properties

Kapustin, F. L., Vaitanova, Y. A. & Kapustin, A. F., 14 Dec 2018, In : IOP Conference Series: Materials Science and Engineering. 451, 1, 012036.

Research output: Contribution to journalConference articleResearchpeer-review

Mineral wool
Sawdust
Oil wells
Mortar
Cements

Modelling of technological machines motion

Chechulin, Y. B. & Buynachev, S. K., 2 Nov 2018, In : IOP Conference Series: Materials Science and Engineering. 441, 1, 012013.

Research output: Contribution to journalConference articleResearchpeer-review

Algorithmic languages

Modern algorithms of machine recognition of graphic objects for image processing system

Loginov, V. N., Shchipanov, K. A. & Lavrov, V. V., 19 Oct 2018, 2018 International Russian Automation Conference, RusAutoCon 2018. Institute of Electrical and Electronics Engineers Inc., 8501721

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Image Processing
Image processing
Defect structures
Defects
Metals

Modification of copper

Sulitsin, A. V., Mysik, R. K. & Brusnitsyn, S. V., 1 Jan 2018, Materials Engineering and Technologies for Production and Processing IV. Radionov, A. (ed.). Trans Tech Publications Ltd., p. 357-362 6 p. (Solid State Phenomena; vol. 284 SSP).

Research output: Chapter in Book/Report/Conference proceedingConference contributionResearchpeer-review

Copper
copper
Metals
metals
cross sections