МИКРОСТРУКТУРА И МЕХАНИЧЕСКИЕ СВОЙСТВА ВЫСОКОПРОЧНОЙ МАШИНОСТРОИТЕЛЬНОЙ СТАЛИ МАРТЕНСИТНОГО КЛАССА

Translated title of the contribution: MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MARTENSITIC HIGH-STRENGTH ENGINEERING STEEL

Research output: Contribution to journalArticle

Abstract

A promising martensitic steel with high hardenability was studied. In the range of cooling rates 0.1…30 °C/s the only one transformation was registered by the dilatometer starting at a temperature of M s = 355 ± 10 °C. The microstructure and mechanical properties of the studied steel were analyzed after various heat treatment modes: cooling from austenitizing temperature with various rates (from 0.02 to 20 °C/s), austempering at a temperature 280…380 °C, oil quenching and tempering at a temperature 200…600 °C. It is shown that a 1000-fold change in the cooling rate weakly affects the strength of the studied steel. The bainitic transformation in the steel under consideration occurred in the temperature range of the martensitic transformation, which led to a decrease in impact toughness compared to the fully martensitic microstructure both after slow cooling and austempering.
Translated title of the contributionMICROSTRUCTURE AND MECHANICAL PROPERTIES OF MARTENSITIC HIGH-STRENGTH ENGINEERING STEEL
Original languageRussian
Pages (from-to)41-49
Number of pages9
JournalМеталлург
Issue number7
Publication statusPublished - 2020

GRNTI

  • 53.00.00 METALLURGY

Level of Research Output

  • VAK List

Fingerprint Dive into the research topics of 'MICROSTRUCTURE AND MECHANICAL PROPERTIES OF MARTENSITIC HIGH-STRENGTH ENGINEERING STEEL'. Together they form a unique fingerprint.

Cite this