МОДЕЛИРОВАНИЕ УГЛОВОГО ПРЕССОВАНИЯ ПОЛОСЫ В 3D ПОСТАНОВКЕ

Translated title of the contribution: Angular strips extrusion modeling in 3D setting

Research output: Contribution to journalArticlepeer-review

Abstract

The results of modeling of angular extrusion by the finite element method are presented in the DEFORM software module. The difference of the solution is the three-dimensional formulation of the problem for the case of pressing magnesium. This made it possible to reveal heterogeneities in the distribution of strains and stresses. It was concluded that the strains at the upper edge of the pressed strip increased to 40% relative to strains at the lower edge. An increase in the level of hardening on the edges of the strip was also revealed, which will have to be taken into account during the subsequent sheet rolling.
Translated title of the contributionAngular strips extrusion modeling in 3D setting
Original languageRussian
Pages (from-to)33-37
JournalКузнечно-штамповочное производство. Обработка материалов давлением
Issue number9
Publication statusPublished - 2019

GRNTI

  • 55.00.00 MACHINE ENGINEERING

Level of Research Output

  • VAK List

Fingerprint

Dive into the research topics of 'Angular strips extrusion modeling in 3D setting'. Together they form a unique fingerprint.

Cite this