ОПТИМИЗАЦИЯ ДВУХЭЛЕКТРОДНОЙ СВАРКИ ПОД ФЛЮСОМ УГЛОВЫХ ШВОВ МОСТОВЫХ МЕТАЛЛОКОНСТРУКЦИЙ

Resultado de pesquisa: Articlerevisão de pares

Resumo

To solve the problem of welding of fi llet welds with leg in one pass of more than 6...8 mm due to the draining of metal from vertical wall it is proposed to use two-electrode welding. The computer analysis of this process showed that acceptable formation of the fi llet weld can be achieved by optimizing of the welding process parameters, including the positioning of electrodes relative to the weld. Due to this, it is possible to provide leg of welds upon welding up to 12 mm. However, large legs of fi llet welds in twin-arc submerged arc welding can be obtained only if the distance between the arcs is suffi cient in order to form separate weld pools, and one of the arcs will be shifted by leg half on the vertical wall.
Título traduzido da contribuiçãoOPTIMIZATION OF TWO-ELECTRODE SUBMERGED ARC WELDING OF FI LLET WELDS OF BRIDGE METAL STRUCTURES
Idioma originalRussian
Páginas (de-até)402-407
Número de páginas6
RevistaЗаготовительные производства в машиностроении
Volume18
Número de emissão9
Estado da publicaçãoPublished - 2020

GRNTI

  • 06.00.00 ECONOMY AND ECONOMIC SCIENCES

Level of Research Output

  • VAK List

Impressão digital

Mergulhe nos tópicos de investigação de “ОПТИМИЗАЦИЯ ДВУХЭЛЕКТРОДНОЙ СВАРКИ ПОД ФЛЮСОМ УГЛОВЫХ ШВОВ МОСТОВЫХ МЕТАЛЛОКОНСТРУКЦИЙ“. Em conjunto formam uma impressão digital única.

Citar isto