Научная группа «Механики обработки материалов давлением и прогрессивных технологических процессов»

科研成果

每年的科研成果 2014 2016 2017 2018 2019 2020 2020

• 65 Article
• 24 Conference contribution
• 7 Conference article

每年的科研成果

每年的科研成果

搜索结果

• 2020

  Assessment of a new equipment for mechanical testing of materials by a torsion

  Bogatov, A. A., Shvarts, D. L., Tolkushkin, A. O., Lezhnev, S. N., Naizabekov, A. B. & Yordanova, R. M., 1 1月 2020, 在: Journal of Chemical Technology and Metallurgy. 55, 5, 页码 1150-1155 6 页码

  科研成果: Article › 同行评审

  • Testing of Material 100%
  • Mechanical testing 71%
  • Torsion 60%
  • Torsional stress 59%
  • Strain 31%

• Development and investigation of the forging method of long-length blanks with mutual displacement of anvils

  Volkov, V. P., Salikhyanov, D. R. & Kamantsev, I. S., 1 1月 2020, 在: Journal of Chemical Technology and Metallurgy. 55, 3, 页码 571-579 9 页码

  科研成果: Article › 同行评审

  • Forging 73%
  • Displacement 56%
  • Shear deformation 34%
  • Shear 31%
  • Computer simulation 28%

• Mathematical Model for Continuous Tube Rolling and the Effect of Technological Factors on Surface Defect Formation

  Toporov, V. A., Ibragimov, P. A., Panasenko, O. A., Nukhov, D. S. & Khalezov, A. O., 12月 2020, 在: Russian Metallurgy (Metally). 2020, 13, 页码 1632-1636 5 页码

  科研成果: Article › 同行评审

  • Surface defects 100%
  • Surface Defect 98%
  • Rolling mills 98%
  • Mathematical models 56%
  • Simulation 52%
  2 引用 （Scopus）

• Mathematical model of neck formation during tensile testing of cylindrical specimen

  Erpalov, M. V., Nukhov, D. S. & Pavlov, D. A., 1 1月 2020, 在: Journal of Chemical Technology and Metallurgy. 55, 3, 页码 544-549 6 页码

  科研成果: Article › 同行评审

  • Tensile testing 100%
  • Error 65%
  • Hardening 60%
  • Mathematical models 59%
  • Shape 56%
  4 引用 （Scopus）

• Rheological Behavior of a VT23 Alloy during Deformation in a Wide Temperature Range

  Gladkovskii, S. V., Volkov, V. P., Salikhyanov, D. R., Veselova, V. E. & Patselov, A. M., 2020, 在: Russian Metallurgy (Metally). 2020, 10, 页码 1147-1150 4 页码

  科研成果: Article › 同行评审

  • Titanium Alloy 100%
  • Phase composition 97%
  • Plastic flow 87%
  • Titanium alloys 84%
  • Flow 52%
  2 引用 （Scopus）
• 2019

  Contact mechanism between dissimilar materials under plastic deformation

  Salikhyanov, D., 1 8月 2019, 在: Comptes Rendus - Mecanique. 347, 8, 页码 588-600 13 页码

  科研成果: Article › 同行评审

  开放访问

  • Dissimilar materials 100%
  • Plastic Deformation 94%
  • Plastic deformation 67%
  • Composite materials 43%
  • Composite Material 37%
  3 引用 （Scopus）

• Development and Introduction of Technology and Equipment for Multiple Drawing of Copper Alloy Thin-Walled Tube on a Long Movable Mandrel Without Intermediate Heat Treatment

  Akchurin, R. Z., Bogatov, A. A., Salikhyanov, D. R. & Ovchinnikov, A. S., 15 1月 2019, 在: Metallurgist. 62, 9-10, 页码 1039-1047 9 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • mandrels 88%
  • Copper Alloy 84%
  • Copper alloys 77%
  • copper alloys 73%
  2 引用 （Scopus）

• Development and research of the new forging technology of billets in the step-wedge dies

  Tolkushkin, A. O., Lezhnev, S. N., Naizabekov, A. B., Panin, E. A., Yordanova, R. M. & Zhumagaliyev, D. R., 1 1月 2019, 在: Journal of Chemical Technology and Metallurgy. 54, 6, 页码 1337-1343 7 页码

  科研成果: Article › 同行评审

  • Forging 73%
  • Shear 31%
  • Metal 31%
  • Force 23%
  • Simulation 21%
  1 引用 （Scopus）

• Development of a method of forging long-length blanks with intensification of shear deformation

  Volkov, V. P., Salikhyanov, D. R., Kamantsev, I. S. & Shamshiev, A. A., 1 1月 2019, 在: Materials Science Forum. 946, 页码 782-787 6 页码

  科研成果: Article › 同行评审

  • forging 83%
  • blanks 81%
  • Forging 73%
  • Shear deformation 69%
  • Shear 63%
  1 引用 （Scopus）

• Digital Control of Electrically Welded Pipe Manufacturing Technology in a Tesa 20–102 Mill

  Timofeev, V. B., Bogatov, A. A. & Medyantsev, I. B., 15 1月 2019, 在: Metallurgist. 62, 9-10, 页码 921-925 5 页码

  科研成果: Article › 同行评审

  • manufacturing 100%
  • Pipe 90%
  • Metal 54%
  • products 30%
  • Energy 28%

• Investigation of the influence of the frequency of rotation of the rolls on the inhomogeneity of deformation during lengthwise rolling of pipes on a stub mandrel

  Pavlov, D. & Erpalov, M., 2019, 在: Materials Today: Proceedings. 19, 页码 1968-1971 4 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • Pipe 47%
  • Rheology 28%
  • Simulation 19%
  • Metal 14%

• Prediction of residual stresses in tubes after sink drawing

  Shimov, G. V., Serebryakov, A. V. & Serebryakov, A. V., 1 1月 2019, 在: Chernye Metally. 2019, 11, 页码 11-16 6 页码

  科研成果: Article › 同行评审

  • Residual Stress 100%
  • Residual stresses 65%
  • Steam generators 59%
  • Pipe 56%
  • Heat 39%

• Бесшовные нержавеющие трубы в бухтах для СПГ-оборудования

  Serebryakov, A. V., Maltsev, V. V., Bazhukov, I. N., Serebryakov, A. V. & Parshakov, S. I., 1 1月 2019, 在: Chernye Metally. 2019, 9, 页码 30-34 5 页码

  科研成果: Article › 同行评审

  • Liquefied Natural Gas 100%
  • Liquefied natural gas 60%
  • Coil 55%
  • Elongation 17%
  • Compliance 17%
  2 引用 （Scopus）

• КОНЦЕПЦИЯ ОПТИМАЛЬНОЙ КАЛИБРОВКИ СОРТОПРОКАТНЫХ ВАЛКОВ. СООБЩЕНИЕ 3.ПРОСТРАНСТВО СХЕМ КАЛИБРОВОК

  Михайленко, А. М. & Шварц, Д. Л., 2019, 在: Известия высших учебных заведений. Черная металлургия. 62, 1, 页码 15-24 10 页码

  科研成果: Article › 同行评审

  • Calibration 100%
  • Block Like Crystal 88%
  • Rolling Process 70%
  • Rolling mills 42%
  • Rails 40%
  1 引用 （Scopus）

• К вопросу о деформации колец внутренним давлением

  Volkov, V. P. & Salikhyanov, D. R., 1 1月 2019, 在: Izvestiya Ferrous Metallurgy. 62, 3, 页码 195-200 6 页码

  科研成果: Article › 同行评审

  开放访问

  • Internal Pressure 100%
  • Dimension 53%
  • Industry 26%
  • Metal 24%
  • Hardening 22%

• Определение геометрических соотношений очага деформации при винтовой прошивке заготовок

  Toporov, V. A., Bogatov, A. A., Nukhov, D. S. & Panasenko, O. A., 1 4月 2019, 在: Chernye Metally. 4, 页码 27-31 5 页码

  科研成果: Article › 同行评审

  • Piercing 100%
  • Metals 40%
  • Pipe 35%
  • Metal 35%
  • Mandrel 31%
  1 引用 （Scopus）

• Оптимизация калибровок валков для прокатки швеллеров. Сообщение 1. Общие положения

  Shvarts, D. L., Mikhaiyenko, A. M. & Ustinova, E. I., 1 1月 2019, 在: Chernye Metally. 2019, 9, 页码 4-8 5 页码

  科研成果: Article › 同行评审

  • Calibration 100%
  • Reduction 59%
  • Block Like Crystal 29%
  • Rolling mills 19%
  • Time 15%
  3 引用 （Scopus）

• Сравнительный анализ методов бесконтактного измерения диаметра прецизионных особотонкостенных труб

  Bazhukov, I. N., Serebryakov, A. V., Parshakov, S. I. & Serebryakov, A. V., 1 4月 2019, 在: Chernye Metally. 4, 页码 32-36 5 页码

  科研成果: Article › 同行评审

  • Compliance 100%
  • Pipe 62%
  • Length 49%
  • Ultrasonics 10%
  • Lasers 8%
• 2018

  Control and experimental data processing in torsion testing with variable acceleration

  Erpalov, M. V. & Pavlov, D. A., 1 1月 2018, 在: CIS Iron and Steel Review. 16, 页码 71-75 5 页码

  科研成果: Article › 同行评审

  • Torsion testing 100%
  • Torsion 61%
  • Strain rate 55%
  • Strain 42%
  • Rheology 32%
  6 引用 （Scopus）

• Investigation of plug rolling with stub mandrel using the finite element method

  Pavlov, D., Bogatov, A., Pavlova, E. & Dyja, H., 1 1月 2018, 在: Archives of Metallurgy and Materials. 63, 3, 页码 1083-1086 4 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • Pipe 47%
  • Finite element method 38%
  • Defects 32%
  • Hexagonal Space Group 24%
  2 引用 （Scopus）

• The choice of initial conditions and of solution in the problem of efficiency increase of pipes calibration on a mandrel

  Salikhyanov, D., Bogatov, A. & Dyja, H., 1 1月 2018, 在: Archives of Metallurgy and Materials. 63, 2, 页码 739-742 4 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • Calibration 47%
  • Pipe 47%
  • Simulation 39%
  • Computer simulation 17%

• Torsion testing method for cylindrical samples of continuous section

  Erpalov, M. V. & Pavlov, D. A., 1 1月 2018, 在: Chernye Metally. 12, 页码 72-76 5 页码

  科研成果: Article › 同行评审

  • Torsion testing 100%
  • Torsion 61%
  • Shear 55%
  • Shear deformation 40%
  • Resistance 38%
  7 引用 （Scopus）

• ВЛИЯНИЕ МОДЕЛИ МАТЕРИАЛА НА НАПРЯЖЕННО-ДЕФОРМИРОВАННОЕ СОСТОЯНИЕ В ОЧАГЕ ДЕФОРМАЦИИ НА ПРИМЕРЕ ПРОЦЕССА БЕЗОПРАВОЧНОГО ВОЛОЧЕНИЯ ТРУБЫ

  Shimov, G. V., Erpalov, M. V. & Pavlov, D. A., 1 10月 2018, 在: Черные металлы. 10, 页码 27-32 6 页码

  科研成果: Article › 同行评审

  • Pipe 47%
  • Strain 43%
  • Rheology 28%
  • Plastics 22%
  • Hardening 19%
  3 引用 （Scopus）

• ИССЛЕДОВАНИЕ ВЛИЯНИЯ СВОЙСТВ МАТЕРИАЛА НЕ НЕОДНОРОДНОСТЬ ДЕФОРМАЦИИ ПРИ ПРОДОЛЬНОЙ ПРОКАТКЕ ТРУБ НА КОРОТКОЙ ОПРАВКЕ

  Pavlov, D. A., Erpalov, M. V., Shimov, G. V. & Pavlova, E. A., 1 10月 2018, 在: Chernye Metally. 10, 页码 17-21 5 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • Materials properties 52%
  • Strain 43%
  • Pipe 39%
  • Hardening 9%
  8 引用 （Scopus）

• ИССЛЕДОВАНИЕ ТРАЕКТОРИИ ТЕЧЕНИЯ НЕПРЕРЫВНОЛИТОЙ МЕДИ ПРИ ПРЕССОВАНИИ СПОСОБОМ СONFORM

  Shimov, G. V., Fominykh, R. V., Efremova, A. S. & Kovin, D. S., 1 1月 2018, 在: Цветные металлы. 4, 页码 79-85 7 页码

  科研成果: Article › 同行评审

  • pressing 100%
  • casts 84%
  • Brass 81%
  • brasses 79%
  • Copper 77%
  6 引用 （Scopus）

• КОНЦЕПЦИЯ ОПТИМАЛЬНОЙ КАЛИБРОВКИ СОРТОПРОКАТНЫХ ВАЛКОВ.СООБЩЕНИЕ 1. ОСНОВНЫЕ ПОЛОЖЕНИЯ

  Mikhailenko, A. M. & Shvarts, D. L., 1 1月 2018, 在: Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. 61, 1, 页码 21-27 7 页码

  科研成果: Article › 同行评审

  • Indicator 100%
  • Block Like Crystal 77%
  • Calibration 58%
  • Rolling mills 14%
  • Physics 10%
  2 引用 （Scopus）

• КОНЦЕПЦИЯ ОПТИМАЛЬНОЙ КАЛИБРОВКИ СОРТОПРОКАТНЫХ ВАЛКОВ.СООБЩЕНИЕ 2. ПРОСТРАНСТВО КАЛИБРОВ

  Mikhailenko, A. M. & Shvarts, D. L., 1 1月 2018, 在: Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. 61, 5, 页码 364-371 8 页码

  科研成果: Article › 同行评审

  • Rails 100%
  • Calibration 67%
  • Metal 52%
  • Metal forming 33%
  • Structural analysis 29%
  1 引用 （Scopus）

• О ПРОБЛЕМЕ ИЗМЕРЕНИЯ ДИАМЕТРА ПРЕЦИЗИОННЫХ ОСОБОТОНКОСТЕННЫХ ТРУБ

  Бажуков, И. Н., Серебряков, А. В., Серебряков, А. В. & Паршаков, С. И., 2018, 在: Chernye Metally. 8, 页码 51-57 7 页码

  科研成果: Article › 同行评审

  • Elastic Deformation 100%
  • Error 75%
  • Force 68%
  • Elastic deformation 56%
  • Nomograms 34%
  2 引用 （Scopus）

• ОСВОЕНИЕ СТАНА ХПТ 10-45 ДЛЯ ПРОКАТКИ ТРУБ ИЗ КОРРОЗИОННОСТОЙКИХ СТАЛЕЙ НА ПРОИЗВОДСТВЕ АО "ПЕРВОУРАЛЬСКИЙ НОВОТРУБНЫЙ ЗАВОД"

  Мальцев, В. В., Митберг, Б. Я., Миронов, В. Г., Бажуков, И. Н., Серебряков, А. В., Серебряков, А. В. & Богатов, А. А., 1 3月 2018, 在: Chernye Metally. 3, 页码 50-56 7 页码

  科研成果: Article › 同行评审

  • Nuclear Power 100%
  • Service life 62%
  • Stainless steel 57%
  • Heat Exchanger Tube 56%
  • Pipe 49%
  2 引用 （Scopus）

• СПОСОБ ФИЗИЧЕСКОГО МОДЕЛИРОВАНИЯ ПРОЦЕССА РАЗРУШЕНИЯ МЕТАЛЛОВ ПРИ ВИНТОВОЙ ПРОКАТКЕ ЗАГОТОВОК

  Bogatov, A. A., Nukhov, D. S., Tolkushkin, A. O. & Panasenko, O. A., 1 10月 2018, 在: Chernye Metally. 10, 页码 6-10 5 页码

  科研成果: Article › 同行评审

  • Piercing 100%
  • Torsion 81%
  • Simulation 50%
  • Ductility 46%
  • Torsional stress 40%
  3 引用 （Scopus）

• СТАТИСТИЧЕСКИЙ АНАЛИЗ И РАСЧЕТ ФОРМОИЗМЕНЕНИЯ МЕТАЛЛА ПРИ ПРОКАТКЕ ДВУТАВРОВЫХ ПРОФИЛЕЙ НА УНИВЕРСАЛЬНЫХ РЕЛЬСОБАЛОЧНЫХ СТАНАХ

  Shilov, V. A., Nepryakhin, S. O. & Shvarts, D. L., 1 1月 2018, 在: Izvestiya Vysshikh Uchebnykh Zavedenij. Chernaya Metallurgiya. 61, 3, 页码 187-193 7 页码

  科研成果: Article › 同行评审

  • Metal forming 100%
  • Rails 75%
  • Statistical methods 74%
  • Reduction 40%
  • Metal 39%

• ТРУБЫ ДЛЯ ТОПЛИВОПРОВОДОВ ВЫСОКОГО ДАВЛЕНИЯ ДИЗЕЛЬНЫХ ДВИГАТЕЛЕЙ

  Serebryakov, A. V., Morgunov, V. A., Serebryakov, A. V. & Parshakov, S. I., 1 10月 2018, 在: Chernye Metally. 10, 页码 11-16 6 页码

  科研成果: Article › 同行评审

  • Diesel engines 100%
  • Fuel 94%
  • Pipe 86%
  • Compliance 46%
  • Diesel Fuel 44%
• 2017

  Crack Resistance of High-Strength Steel and Breakage of a Gas Pipeline

  Bogatov, A. A., 5月 2017, 在: Metallurgist. 61, 1-2, 页码 47-52 6 页码

  科研成果: Article › 同行评审

  • Pipeline 93%
  • Gas pipelines 90%
  • High strength steel 82%
  • cracks 61%
  • Fracture Mechanics 60%
  2 引用 （Scopus）

• Development of Bonding Mechanisms for Different Materials During Forming

  Bogatov, A. A. & Salikhyanov, D. R., 3月 2017, 在: Metallurgist. 60, 11-12, 页码 1175-1179 5 页码

  科研成果: Article › 同行评审

  • bimetals 100%
  • Bimetals 98%
  • metal forming 46%
  • Metal 45%
  • Metal forming 38%
  3 引用 （Scopus）

• Development of Finite-Element Modeling of Processing Metals Under Pressure Using Variational Principles of Mechanics Proposed by V. L. Kolmogorov

  Bogatov, A. A., 1月 2017, 在: Metallurgist. 60, 9-10, 页码 923-929 7 页码

  科研成果: Article › 同行评审

  • Mechanics 100%
  • variational principles 98%
  • Metals 56%
  • Pressure 50%
  • metals 44%

• Intensification of Tube Plugging Based on Simulation Results

  Bogatov, A. A., Pavlov, D. A. & Pavlova, E. A., 1月 2017, 在: Metallurgist. 60, 9-10, 页码 1016-1021 6 页码

  科研成果: Article › 同行评审

  • Kinematics 100%
  • plugging 97%
  • Rolling mills 84%
  • Tension 68%
  • tubes 51%
  2 引用 （Scopus）

• Modernization of Railroad Wheel Manufacturing Technology at Evraz Ntmk

  Kushnarev, A. V., Kirichkov, A. A., Bogatov, A. A. & Puzyrev, S. S., 1月 2017, 在: Metallurgist. 60, 9-10, 页码 1080-1086 7 页码

  科研成果: Article › 同行评审

  • rail transportation 100%
  • Railroads 77%
  • wheels 76%
  • Modernization 75%
  • Shot Peening 57%
  2 引用 （Scopus）

• New Variational Solutions for the Rolling of Flanged Sections in Universal Roll Passes

  Shvarts, D. L., Nepryakhin, S. O. & Shilov, V. A., 3月 2017, 在: Metallurgist. 60, 11-12, 页码 1256-1261 6 页码

  科研成果: Article › 同行评审

  • I beams 100%
  • rails 70%
  • variational principles 66%
  • Rails 50%
  • engineering 43%
  1 引用 （Scopus）

• Production of thin-walled sleeves on the piercing mill at PAO STZ

  Toporov, V. A., Bogatov, A. A., Nukhov, D. S., P'yankov, B. G. & Panasenko, O. A., 1 5月 2017, 在: Steel in Translation. 47, 5, 页码 330-333 4 页码

  科研成果: Article › 同行评审

  • Piercing 100%
  • Dimension 59%
  • Force 53%
  • Finite element method 24%

• Simulation of Rotary Piercing Process

  Bogatov, A. A., Nukhov, D. S. & Toporov, V. A., 5月 2017, 在: Metallurgist. 61, 1-2, 页码 101-105 5 页码

  科研成果: Article › 同行评审

  • Lead screws 100%
  • piercing 88%
  • draft 82%
  • Piercing 78%
  • Strain 43%
  9 引用 （Scopus）

• Study of Metal Strained State During Workpiece Reduction in a Three-Roll Screw-Rolling Mill

  Bogatov, A. A. & Pavlov, D. A., 7月 2017, 在: Metallurgist. 61, 3-4, 页码 311-317 7 页码

  科研成果: Article › 同行评审

  • Rolls (machine components) 100%
  • Rolling mills 84%
  • screws 79%
  • Metals 45%
  • Plastic Deformation 44%
  6 引用 （Scopus）

• Using the Upper-Bound Method to Calculate the Upsetting Forces for Oil Pipes

  Erpalov, M. V., Dyja, H. S. & Bogatov, A. A., 7月 2017, 在: Metallurgist. 61, 3-4, 页码 179-182 4 页码

  科研成果: Article › 同行评审

  • upsetting 100%
  • oils 61%
  • Pipe 51%
  • Force 45%
  • Oils 43%
• 2016

  Aspects of the Rolling of Long Rails on a Universal Rail-Beam Mill

  Shilov, V. A., Shvarts, D. L. & Skosar, E. O., 1 1月 2016, 在: Metallurgist. 60, 3-4, 页码 260-266 7 页码

  科研成果: Article › 同行评审

  • rails 100%
  • Rails 71%
  • Temperature distribution 51%
  • temperature distribution 51%
  • Length 50%
  11 引用 （Scopus）

• Causes of Formation and Ways of Elimination of Defects on the Internal Surface of Upset Tube Ends

  Bogatov, A. A. & Erpalov, M. V., 5月 2016, 在: Metal Science and Heat Treatment. 58, 1-2, 页码 33-36 4 页码

  科研成果: Article › 同行评审

  • upsetting 100%
  • Hydraulic machinery 93%
  • Thickening 84%
  • elimination 66%
  • Synchronous Meteorological Satellite 56%
  3 引用 （Scopus）

• Deformation, stress and fracturing of steel in the process of flat rolling

  Bogatov, A., Dyja, H. & Nukhov, D., 2016, 在: Journal of Chemical Technology and Metallurgy. 51, 4, 页码 379-384 6 页码

  科研成果: Article › 同行评审

  • Plate Like Crystal 100%
  • Steel 73%
  • Stringers 56%
  • Mechanical properties 27%

• Development and research of combined process of equal channel angular pressing - drawing

  Volokitin, A., Naizabekov, A., Bogatov, A., Leshchev, I. & Kozlov, V., 2016, 在: Journal of Chemical Technology and Metallurgy. 51, 4, 页码 417-426 10 页码

  科研成果: Article › 同行评审

  • Equal channel angular pressing 100%
  • Crystal microstructure 92%
  • Extrusion 71%
  • Strain 51%
  • Simulation 46%

• Expansion of a pair of dissimilar metal shells in lined-pipe production

  Bogatov, N. A., Bogatov, A. A. & Salikhyanov, D. R., 1 7月 2016, 在: Steel in Translation. 46, 7, 页码 453-457 5 页码

  科研成果: Article › 同行评审

  • Dissimilar metals 100%
  • Pipe 56%
  • Machining 48%
  • Composite Material 37%
  • Metal 33%

• Increase of efficiency of pipe ends upsetting technology by research on metal forming

  Erpalov, M., 2016, 在: Journal of Chemical Technology and Metallurgy. 51, 4, 页码 405-410 6 页码

  科研成果: Article › 同行评审

  • Upsetting (forming) 100%
  • Metal forming 72%
  • Pipe 48%
  • Defects 43%
  • Simulation 40%

• Influence of the temperature and strain rate on the deformability of low-alloy carbon steel

  Laber, K. B., Dyja, H. S., Kawalek, A. M., Bogatov, A. A. & Nukhov, D. S., 1 9月 2016, 在: Steel in Translation. 46, 9, 页码 620-623 4 页码

  科研成果: Article › 同行评审

  • Alloy steel 100%
  • Formability 94%
  • Carbon steel 84%
  • Strain rate 82%
  • Strain 62%
  1 引用 （Scopus）

• Pipe rolling on a short mandrel with kinematic tension

  Bogatov, A. A., Pavlov, D. A. & Pavlova, E. A., 1 1月 2016, 在: Steel in Translation. 46, 1, 页码 39-41 3 页码

  科研成果: Article › 同行评审

  • Mandrel 100%
  • Kinematics 87%
  • Tension 60%
  • Pipe 47%
  • Rolling mills 40%